Animal Surgical Equipment Accessories
World Precision Instrument Rat Adaptor Kit, 45 Deg
The 505239Rat Adaptor Kit, 18 Degree is included with all WPI Rat Stereotaxic Instruments. It has 30 mm of vertical travel along dovetail slide and 0.1 mm vernier scales. 50 mm of Anterior-Posterior travel possible. The nose clamp assembly, and either standard 18 deg. (traditional) Ear Bars or non-puncture 45° Ear Bars, are included. For nontraumatic ear bars select the 45° option (505238).
Med Vet International Amber Prescription Vial, 16 Dram, 270/Case
Amber Prescription Vial 16 Dram 270/Case
Med Vet International Chemo Dispensing Pins™ w/ Distal MINI-SPIKE, J0463T, Each
Chemo Dispensing Pins™ designed to eliminate aerosoling of chemotherapeutic medications during the reonstitution and dispensing process. Assists in USP compliance. DEHP-free. Latex-free. Chemo Dispensing Pin™ with distal MINI-SPIKE and built-in 0.2 micron hydrophobic air-venting filter. Proximal luer lock connector.
Med Vet International 2.7mm Coritcal Self-Tapping Screws, 28mm x 2.0mm, J1072LT
2.7mm Coritcal Self-Tapping Screws, 28mm x 2.0mm
Med Vet International Cancellous Screws 3.5mm x 36mm, J0423N, 6 Pack
3.5mm Cancellous Screw. 1.75 Pitch. The coarser thread has a much bigger "bite" into the bone. Use on metaphyseal or other cancellous bone. The screw needs its own tap. (JOR409c)
Med Vet International Cancellous Screw, J0419NC, 3mm x 32mm, Each
2mm pilot. 2.5 hex head. Self-tapping. Single pack.
Med Vet International Self Tap Screws, Cruciate, J0406J, 3.5mm x 38mm, 6 Count
The 9/64" self-tapping screw has similar pull-out resistance to 3.5mm cortical screws. The main problem with this screw has been a lack of suitable bone plates. Our new range of 3.5mm round-hole plates considerably widens the scope of these self-tapping screws. Cruciate head. 6/pk.
Med Vet International 2.4mm x 38mm Titanium Cortical Self-Tapping Screws, J1073PT, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Med Vet International Locking Screw, 2.7mm x 18mm, J1133G
Locking Screws and Plates. A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Plates 2.7mm 18mm
Med Vet International Cancellous Screws 3.5mm x 18mm, J0423E, 6 Pack
3.5mm Cancellous Screw. 1.75 Pitch. The coarser thread has a much bigger "bite" into the bone. Use on metaphyseal or other cancellous bone. The screw needs its own tap. (JOR409c)
Med Vet International Cancellous Screw, J0416HC, 2.2mm x 20mm, Each
2.2mm Cancellous Screw. 1.5 pilot. 1.5 hex head. Self tapping. Single pack.
Med Vet International Cancellous Screws 3.5mm x 14mm, J0423C, 6 Pack
3.5mm Cancellous Screw. 1.75 Pitch. The coarser thread has a much bigger "bite" into the bone. Use on metaphyseal or other cancellous bone. The screw needs its own tap. (JOR409c)
Med Vet International 3mm x 13mm Titanium TTA Cage, 2.4mm Screw, J1072GBT
TTA (Tibial Tuberosity Advancement) Plates and Cages Titanium Cage 3 x 13mm titanium 2.4mm screw
Med Vet International JorVet Combo Ultrasonic Dental Unit, J0841Q
This dental combo unit with its sleek design and affordable price is the workhorse your hospital needs! Contemporary design with a small footprint Operation frequency 25kHz Includes inline water filter, 2 inserts (1 spatula, 1 universal), micro-motor, polisher handpiece, prophy angle, prophy cups and paste starter kit Comes with quick release attachment for water tank set-up (optional water tank JOR452d4) Large, easy-to-read LED power display Micromotor variable speed 2,000-30,000 rpm with forward/reverse Foot pedal operation Optional drilling and sectioning attachments available 6-year limited warranty (90 days on inserts and prophy angle, 1 year on the handpiece) Dimensions: 6"L x 8"W x 3 1/2in. H Weight: 6.5 lbs.
Med Vet International Ophthalmic Implant 43mm, J1244N, Each
Clients value their pets' appearance, shouldn't their veterinarian? The surgical enucleation of a pet's eye is a disheartening procedure. The pet owner is often more traumatized than the pet itself. Part of the surpeon's responsibility is creating the best possible post-operative appearance. The most common type of procedure is the transpalpebral approach. This technique requires the placement of an orbital implant to look cosmetically pleasing. With no implant, there will be a marked indentation as the potentially vacant space contracts. The Ophthalmic Implants are: - Simple to use by any surgeon - Quality silicone from Dow Corning - Lightweight and easily sterilized by autoclaving - Inexpensive implant cost - Black glossy color - Multitude of sizes - Manufactured in the U.S.A. at an FDA inspected facility Sizing guideline: measure the distance across the cornea then subtract 2mm. 43mm